P100AC2 SMK Motorized Sprayer

(model # SP1200)

The P100AC2 model is specifically manufactured with a completely new internal and external housing components to evenly apply your product without pumping. Contractors will reduce their application by half because the motorized sprayer action disperses a continuous spray. The unit locks on to a 5 gallon bucket for easy mobility. The P100AC2 uses one DeWalt® NiCad or Lithium Ion 18V battery. 

The P100AC2 will spray all chemicals that are 25% solids or less.

With proper clean-up after each use, contractors and homeowners alike will enjoy many...

-
+
$805.00

(model # SP1200)

The P100AC2 model is specifically manufactured with a completely new internal and external housing components to evenly apply your product without pumping. Contractors will reduce their application by half because the motorized sprayer action disperses a continuous spray. The unit locks on to a 5 gallon bucket for easy mobility. The P100AC2 uses one DeWalt® NiCad or Lithium Ion 18V battery. 

The P100AC2 will spray all chemicals that are 25% solids or less.

With proper clean-up after each use, contractors and homeowners alike will enjoy many years of safe, reliable service. 

For greater mobility, add the C100 portable cart.

 

 


Compatible:

  • Most all chemicals with solids of 25% or less.
  • This sprayer is intended for and was tested with chemicals used for curing and sealing applications.

Not Compatible:

  • Concentrated (pure) hydrochloric acid
  • Nitric acid
  • Sulfuric acid
  • TBA
  • Oxsol 100
  • Do not spray liquids with high solids (over 25%) or abrasive additives as this will destroy the pumps gears and will void the 60 warranty.

Caution: If fluid is improperly matched to the pump’s elastomers, a leak or damage to the pump may occur.  

Be certain that material being sprayed is compatible with Geolast valves, Buna-N diaphragms, and polypropylene pump body.